the TM2-XSFPFM is a single slot dual transponder module of the lambdadriver optical tranport system. it incorporates two independent 10gbps transponders which support transparent transport of 10gbps and 8g fc over otu2 transport layer.the access ports can be ftted with sfp+ transceivers and the line ports with xfp transceivers supporting any standard sfp+ and xfp, including dwdm tunable types. a key feature of each of the channels is support of the g.709 fec protocol as well as enhanced fec (efec) with superior error correction performance. the fec functionality signifcantly extends the overall distance reach of a 10gbps rate link while maintaining the expected industry standard ber performance. fec and efec modes are user selectable with the system management card. performance monitoring is supported for both access and trunk ports, providing the relevant conditions and alarms at each receive side. statistics for current 15 minutes interval and up to 96 previous intervals can be viewed. line and diagnostic loop-back functionality is supported and provides an invaluable tool for troubleshooting and maintenance operations in a live network. the diagnostics loop-back function checks the integrity of the internal ports circuitry while the line loop-back is used to check the fber connections integrity. the line loop-back and the diagnostics loop-back are available for both the access (client) and trunk ports. the link integrity notifcation (lin) function allows the terminal equipment to detect link failure in the path between the two terminal equipment units regardless of the location of the failure. the integrated automatic laser shutdown (als/apr) feature automatically reduces the optical power of the transmitter to an eye safe level in case of a broken link. lambdadriver ? C10gbps - dual transponder module with fec (TM2-XSFPFM) overview ld1600 TM2-XSFPFM ld1600 lambdadriver-1600p tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-21 tm-sfp tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm lambdadriver-1600p tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-21 tm-sfp tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm TM2-XSFPFM redundant link transponder dual transponder TM2-XSFPFM 10ge, oc 192/stm64 and 8gfc protocols operatiblity otu2 repeater mode fec/efec capabilities g.709 performance monitoring line and diagnostics loop-back tests xfp/sfp+ digital diagnostics link integrity notifcation (lin) self-healing protection eye safe - als/apr hot swappable applications dwdm networks with end-to-end performance monitoring upgrade of existing cwdm/dwdm networks to extend optical operating range and speed features tm2-xfpf ld1600 TM2-XSFPFM ld1600 lambdadriver-1600p tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-21 tm-sfp tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm lambdadriver-1600p tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-21 tm-sfp tx rx access tx rx wdm dwdm ch-21 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp tx rx access tx rx wdm dwl3 ch-25 tm-sfp em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm em1600-mgt link act eth3 mgt pwr link act eth4 link act eth2 tx rx eth1 link act tx rx console alarm primary secondary y-cable y-cable TM2-XSFPFM not sure what solution best fts your needs? visit www.mrv.com or e-mail us at sales@mrv.com datasheet
mrv (west coast usa) 20415 nordhoff st. chatsworth, ca 91311 800-338-5316 818-773-0900 mrv (east coast usa) 295 foster st. littleton, ma 01460 800-338-5316 978-952-4700 mrv (international) bussiness park moerfelden waldeckerstrasse 13 64546 moerfelden-walldorf germany tel. (49) 6105/2070 fax. (49) 6105/207-100 mrv has more than 50 offices throughout the world. addresses, phone numbers, and fax numbers are listed a t www.mrv.com. please e-mail us at sales@mrv.com or call us for assistance. all statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. however, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. please contact mrv communications for more information. mrv communications and the mrv communications logo are trademarks of mr v communications, inc. other trademarks are the property of their respective holders. mrv-ld-tm2xsfpfm rev.1 01-13 copyright ?2013 mrv communications, inc. all rights reserved. the following three redundancy protection modes are available: - redundancy between two adjacent TM2-XSFPFMs using y-cables. in this mode, one TM2-XSFPFM is active while the adjacent TM2-XSFPFM is in standby. - redundancy between two transponders of the same TM2-XSFPFM using y-cables. in this mode, one transponder is active while the second is in standby. - redundancy between two transponders of the same TM2-XSFPFM using self-healing instead of y-cables. in this mode, one access port and one line port are active while the second line port is in standby. in repeater mode, 3r retiming/reshaping is appled to an otu2 rate access client (gfec only) transported over the line port either at gfec or efec otu2 rate. the modules are manageable with the lambdadriver management module either locally with rs232 cli access or remotely with telnet or ssh station or with and snmp manager (e.g. megavision pro tm or pro-vision?). product description TM2-XSFPFM sfp+ access, xfp line ports, dual transponder with fec for 10gbps. operating temperature -5 to 50 0 c (23 to 122 0 f) storage temperature -10 to 70 0 c (14 to 158 0 f) relative humidity 90% max, non-condensing dimensions (w x h x d) 26.93 mm (1.06 in); 130.7 (5.145 in); 227.5mm (8.956 in) weight 0.55 kg (1.21 lb) mtbf @25 0 c/77 0 f 605656 hr connectors per the sfp+/xfp power consumption module: 15.5w (53btu/hr) sfp+: 1w (3.4 btu/hr) xfp: 3.5w (12btu/hr) enviromental technical specifcations regulatory compliance fcc part 15 (class a); emc directive: emission (class a) and immunity; rohs2 directive, reach svhc, weee directive. line rate 10.709gbps g.709 power budget gain + 6db efec power budget gain + 8db optical parameters per the xfp/sfp+ order info
|
